BaoFeng Programming USB Cable Driver Windows 7/10/11

Discussing BaoFeng Programming USB cable driver's latest 

BaoFeng Programming USB Cable Driver is software that allows your PC to communicate with your phone. This is important if you want to program your BaoFeng Phone or another Chinese cell phone. 

It also helps you to update your BaoFeng Phone without having to go to a store. This software is easy to install and will help you to make your cell phone work faster.

Identify the chip in the cable

There is a good chance you have a cheap knockoff cable that uses a fake FTDI chip to convert USB to UART. These cables can cause problems with Windows drivers. This can be frustrating to deal with. However, there are a couple of ways to make it work.

First, you can check to see if your PC supports this type of device. To find out, open your Windows Device Manager. In the list of devices, you'll see the name of the driver. If your computer supports the driver, you'll see the COM port associated with it. If not, it won't be listed.

Another option is to download the correct driver. This can be done manually, or automatically through the operating system. Alternatively, you can use a third-party driver update utility.

Regardless of which method you use, you'll need to ensure the proper driver is installed. For example, if you don't have the right driver for your BaoFeng USB programming cable, you won't be able to connect it to your radio. This is a common problem.

In some cases, your PC will have a COM port associated with the cable, but it won't show up in the Device Manager. If that's the case, you may need to download and install the correct driver. This can be done using a program such as Driver Easy. This program is simple to use and will scan your PC for unplugged devices.

Install the driver

If you're new to BaoFeng two-way radios, you might not know that you can program them using just a USB cable. The cable connects your radio to your computer and allows you to program the frequency. However, not all cables are created equal. Some work automatically while others require you to download the driver and enable the device.


There are a few things to look out for, including counterfeit programming cables. These are typically sold on eBay or at the Amazon store. They may use cloned chipsets from old Prolific cables, or they simply cut corners. Luckily, installing the right drivers makes it easier to program your radio.

You'll also want to make sure you install the correct software. Many of the provided CDs come with the wrong drivers. This can lead to confusion and frustration.

The other big thing to look out for is the quality of the USB programming cable. Some are fake and won't work. If yours is shoddy, you may need to buy a replacement. A good quality cable won't cost a fortune. You can also opt for the BaoFeng Tech brand. These cables will work with the operating system's default drivers, so you won't have to worry about downloading a set of CDs.

Verify connection

If you want to use your BaoFeng UV-5R radio on your PC, you need to be sure that you have the proper USB programming cable and driver installed. If you are not sure which programming cable is best for your radio, you can refer to the manufacturer's instructions or the manufacturer's website. Then, you can follow the steps below to make sure you're set up to connect your radio.

First, you need to plug your USB programming cable into the computer. You may need to key in the COM port, depending on which model you have. If you are a new user, you may also need to turn on the power to your PC.

Next, open your "Device Manager." This is a tool that can be found in the Windows Start Menu. You should also be able to find a driver for your USB cable in the Device Manager. If your computer does not automatically install drivers, you can also use a third-party utility like Driver Easy.

The software should be able to download the radio frequency table. You can also check to see if the radio is working by checking the power indicator. It should flash, indicating that it is downloading the frequencies. If it isn't, you may have to select a different channel.

Downloads links 

Free Download Driver<< (Setup Here)

Free Download Driver<< (Setup Here Link 2)

BaoFeng Programming USB Cable Driver Windows 7/10/11 Rating: 4.5 Diposkan Oleh: Hidayat shah

0 Post a Comment:

Post a Comment